6 Factors To Replace A Fluorescent Light Bulb With An LED T8 Light

Up until a few years ago most people were being put of with choosing to set up any kind of LED lighting in their homes or businesses because they were simply to expensive. However LED tech has come a long way and it is possible now to install such light in your home at a much lower cost especially with the introduction of the LED T8 light.

In fact if you are thinking of changing any fluorescent lights in your home or business then this is the most suitable option for you. The fantastic thing about this type of LED lighting is that you can place them such fittings where an existing T8 fluorescent fixture is fitted. You could directly replace the fluorescent tube with an LED T8 light without needing to change out the ballast (so long as what is already in there is instant start ballast).

Lots of home owners do not think of putting much into bathroom lighting. Anytime it comes to the living room and kitchen, though, it seems people can never spend enough.

So why should you consider replacing your current T8 fluorescent light with an LED T8 tube?

The solution to this is quite simple really.

1. This type of light is 30% more effective. As well as using far less wattage compared to a conventional fluorescent bulb they also produce much more light. Today the majority of the LED T8 lights use only 22 watts rather than the 28 to 32 that a fluorescent one does.

Among the problems of LED lights, dimmability is one of the latest issues still yet to be fully solved. Dimming LEDs is actually easy, simply because analogue dimming, that is the adjustment of power, has long been an option.

1. Such lights offer a directional light source, which means that these emit light covering an area of 110 degrees rather than 360 degrees. So of course now all of the light released is hitting the intended target rather than just 30% of it.

1. An LED T8 light transfers light rather than heat. The energy used by such lights is designed to emit light instead of heat. Whereas more traditional light sources of course tend to generate heat rather than light which is why they aren't as effective now with home or business owners.

Most metal halide lights used in the home these days are set up where bright light is required such as a kitchen or restroom. However if you are intending to use this kind of lighting in your house there are particular precautions that must be undertaken.

1. Even towards the end of their light such an LED light is still going to be giving off light. On average you can expect to not need to change one of these lights for several years because they are able to emit light for around 50,000 hours. Whereas when it comes to a fluorescent T8 light expect to have to replace it earlier as they only tend to put out light for about 14,400 hours.

1. Another important thing to remember is that the LED T8 light is much safer as it contains no mercury or glass in them. Not only is it safer on you in the house but also for the environment. Currently around 400 pounds of mercury will end up a waste each year from bulbs because people simply cannot be bothered to worry about recycling them.

The Earth4Energy kit is a well-designed, self-help kit designed to provide you with photovoltaic solar panels at a fraction of their original value, saving you thousands of dollars

1. One last thing that to know about an LED T8 light is that these don't emit any light that is part of the UV (non visible) light spectrum. Not only can this cause damage to furniture by causing the colour in the fabric to fade but also can lead to health issues for because UV bulbs place strain on the eyes.

6 Factors To Replace A Fluorescent Light Bulb With An LED T8 Light
Up until a few years ago most people were being put of with choosing to set up any kind of LED lighting in their homes or businesses because they were simply to expensive.

The Completely Different Look Of LED Lights Tube
With the recent introduction of LED lights tube in the market, the issue of whether it is much more cost-efficient to continue using fluorescent lamps or replace them with LED linear tubes have been in the minds of several consumers.

LED-based Tubes Have Got What Is Typically Called As '?
For quite some time, people have been utilizing fluorescent lamps for various lighting requirements at home or commercial establishments. While the LED tube lights have been around for some time in the market.

The Many Appearance Of LED Fluorescent Lighting
With the recent introduction of LED lights tube in the market, the question of whether it is more economical to continue using fluorescent lamps or replace them with LED linear tubes have been in the minds of many consumers

Why Choose LED Lights Over Its Counterparts?
For the past several years LED technology has been fairly expensive and its installation also cost as much. Hence, people have resorted to using alternative lighting technology such as the T8, CFL and Halogen which were supposed to perform as much as LED but is priced much lower.

Things To Consider While Selecting A Pro To Fix An LED High Bay Lighting System
There are a number of things that need to be considered when you are thinking about hiring the services of a professional to install an LED high bay light system for you

3 Ideas To Guide With Fitting An LED Light
The first thing you will learn about an LED downlight is that it is much more energy-efficient when compared with more conventional types such as fluorescent.

Why Go For LED T8 Light Bulbs Over LFLs?
For many years, people have been utilizing fluorescent lamps for different lighting needs at home or commercial establishments. While the LED tube lights have been around for some time in the market, it is only recently that the technology has been developed to manufacturer them at lesser costs.